PSC PT Program Generator - Manual (Page 148)

Example Frames
136
PT Program Generator (PPG) v5.0
Setting the Date and Time
All PSC portables include a clock that keeps track of the current date and
time. To allow users to adjust the date and time settings, complete the follow-
ing steps:
1. Create a new Output node.
2. Set the Output Destination to System.
3. Select Constant as the
Data Source .
4. Enter this command as the constant:
• To set the time : %-;
• To set the date : %.
• Example : %-% displays the old time or date.
5. Enter the new time or date; if the time or date is correct press
<ENTER> .
Changing the Auto-Off Timeout
By default, the PSC portable powers off automatically after ten minutes of
inactivity. To change this setting, complete the following steps:
1. Create a new Output node.
2. Set the Output Destination to System.
3. Select Constant as the
Data Source .
4. Enter this command as the constant: $+$-B2nnEE where nn = the
number of minutes of inactivity.
• Example : $+$-B205EE sets the
Auto-off timeout at 5 minutes.
2342.book Page 136 Thursday, July 22, 2004 8:35 AM