Speaker conwctions, Speaker connections, Product servicing – Panasonic CQ-5302U User Manual

Page 42: Maintenance, Caution

Advertising
background image

CQ-5302U

42

Speaker Connections

Caution: Please follow the instructions given below. Failure to do so will cause damage to the unit and speakers.

L

R

-

-

-

-

-

-

-

-

-

-

+

+

+

+

+

+

+

+

+

+

-

+

-

+

-

+

-

+

-

+

-

+

-

+

-

+

L

R

L

R

L

R

<Right>

<Wrong>

(White)

(White
w/black stripe)

Chassis

(Gray
w/black stripe)

(Gray)

Chassis

• Use ungrounded speaker only.
• The maximum speaker input should be 37 W or more. (If used with the optional

power amplifier, the speaker input should be higher than the maximum amplifier
output.)

• The speaker impedance should be 4 - 8

Ω.

• This unit uses the BTCL circuit, so each speaker should be connected separately

using parallel vinyl insulated cords.

• The speaker cords and the power amplifier unit should be kept away (about 30 cm

apart) from the antenna and antenna extension cord.

• Never connect the speaker cord to

the body of the car.

• Do not use a 3-wire type speaker

system having a common earth
lead.

• Do not connect more than one

speaker to one set of speaker
leads.

Product Servicing

If the suggestions in the charts do not solve the problem, we recommend that you take it to your nearest authorized
Panasonic Service center. The product should be serviced only by a qualified technician.

Maintenance

Your product is designed and manufactured to ensure the minimum of maintenance. Use a soft cloth for routine
exterior cleaning. Never use benzine, thinner, or other solvents.

Caution

This product is designed without a fuse inside due to fuses already exist in your vehicle. We would recommend to use
fuses of the specified rating (10 A). Using fuses that exceed the prescribed capacity could cause this product to start
smoking, ignite or other malfunction.
If your vehicle is without the fuse or a circuit braker to protect this unit ,please your dealer add the specified fuse 10 A
or a circuit breaker at the BATTERY lead of your vehicle's harness. please see page 47 to find out where "BATTERY +
12 V" is for your dealer adding the fuse or the circuit breaker.

Advertising