Panasonic TU-HDT206A - Manual (Page 4)

Operating Instructions
TU-HDT206A
4
1 Introduction
This Operating Instruction Book is the GUIDE to your digital receiver. In it you can
find comprehensive descriptions of the functions of your receiver. Once you become
acquainted with the operations of your digital receiver, you will only need this manual
for reference.
1.1 IMPORTANT: First time Installers
IMPORTANT: For first time installers, please read Section 4, “Installation of the
Digital Receiver”, to learn how to connect your digital receiver to other A/V equipment.
Once you have completed the setup, go to Section 6.2, “Video Menu”, to select
various system settings according to your personal preference, and Section 6.3,
“Audio Menu” and Section 6.5, “Tuning Menu”, to set your region for correct current
time and to conduct channel search.
2 The Digital Receiver
2.1 Front Panel
(Power Button): Turns the digital receiver On / Off (Standby mode).
EXIT Button: To return to the previous menu from the sub-menus.
Display: Shows the logical channel number when the box is switched on.
Front Panel Arrow Buttons: / buttons to select channels or settings within the
menus.
Stand-By Indicator (LED): Lights red in Stand-By mode. When the digital receiver is
working the LED becomes green.
Infrared (IR) Indicator (LED): The red LED flashes, indicating the box has received
a command from the remote control.
Signal Indicator (LED): When a signal of a channel is successfully acquired the
yellow LED will light up.