Panasonic TU-HDT206A - Manual (Page 8)

Operating Instructions
TU-HDT206A
8
RGB Connection (D)
Connect the RGB 15pin D socket to your
display device. (Refer to D)
Check the display video specifications,
many displays cannot show 50Hz TV
formats that the STB outputs.
Note: RGB Cable is not supplied.
Note: There is no RGB output signal when
component video (YPbPr) is connected.
VIDEO and S-VIDEO (E)
Connect the VIDEO output socket on your
digital receiver to your TV’s video input
socket.
Alternatively, connect the S-VIDEO (Y/C)
output socket on your receiver to your TV’s
S-Video input socket.(Refer to E)
Note: The cable is not supplied.
Note: VIDEO or S-VIDEO can be
connected to a VCR or DVD recorder if
they are not being used with a display. When an HD connection is made to the digital
receiver, there is no OSD on the VIDEO or S-VIDEO connection output pictures.
Audio Connections
DIGITAL AUDIO (F)
If the display device is equipped with Dolby
Digital audio and PCM audio decoding
capability, connect the DIGITAL AUDIO
output of the digital receiver to the display
device’s Digital Audio input using either the
OPTICAL or COAXIAL socket. (Refer to F)
Alternatively, connect the DIGITAL AUDIO
output to an A/V receiver with Dolby Digital
decoding and PCM decoding capability.
Note: The cable is not supplied.
Analogue Audio (G)
Connect the L & R AUDIO output RCA
sockets on the digital receiver to the stereo
L & R Audio inputs of the display device
and/or A/V receiver. (Not required with
HDMI).
(Refer to G). Please use the RCA sockets
associated with the video format (HD or SD)
that is connected to the display.
(E) VIDEO / S-VIDEO Connection
(F) DIGITAL AUDIO Connection
(G) Analogue Audio Connection
(D) RGB Connection