Panasonic KX-FLB753HK - Manual (Page 51)

Copying
- 51 -
Copy Making a copy
The unit can make single or multiple copies (up to 99).
1
Set the original.
Using the auto document feeder
L
Confirm that there are no documents
on the scanner glass.
1. Adjust the width of the document guides
to the size of the document.
2. Insert the document (up to 15 pages)
FACE DOWN into the feeder until the
unit grasps the document and a single
beep is heard.
STANDARD
Using the scanner glass
L
Confirm that there are no documents
in the auto document feeder.
1. Open the document cover.
2. Place the document FACE DOWN on
the scanner glass, matching the top
edge of the document to the
T
mark on
the unit.
3. Close the document cover.
L
If the original is a thick book, do not
close the document cover.
2
If necessary, press
{
RESOLUTION
}
repeatedly to select the desired setting.
3
Press
{
COPY START
}
.
100% FINE [01]
COPY:PRESS START
L
If necessary, enter the number of copies
(up to 99).
4
Press
{
COPY START
}
.
L
The unit will start copying.
Note:
L
Do not open the document cover when
making a copy with the auto document
feeder.
L
Any transmittable document can be copied
(page 35).
L
To make a clear copy from transparencies, be
sure to use the scanner glass. Place a blank
sheet of paper on the top of the transparency,
and leave the document cover open during
copying.
FACEDOWN
Document guides
{COPY START}
{RESOLUTION}
Document
cover
Scanner
glass
{COPY START}
{RESOLUTION}