Panasonic KX-FLB753HK - Manual (Page 58)

Printing (PC)
- 58 -
Labels
Use labels designed for laser printing.
L
Load label sheets one page at a time for
printing. Print side must face down.
L
Remove each label after printing.
L
Do not use the following types of labels:
–
Labels that are wrinkled, damaged or
separated from the backing sheet.
– Any sheet of labels that has spaces in it
where some of the labels have been
removed.
– Labels that do not completely cover the
backing sheet.
Envelopes
Use envelopes designed for laser printing. We
recommend the following:
–
High quality envelopes of 90 g/m
2
paper,
– Envelopes that have thin, sharply creased
leading edges, and
– Envelopes that have diagonal seams.
L
You can load up to 10 envelopes of 90
g/m
2
paper at a time for printing. Print side
must face down.
L
Remove each envelope after printing.
Note:
L
Wrinkles may occur in some cases, even if
high quality envelopes are used.
L
Avoid printing in high humidity, above 70%
relative humidity (RH). High humidity may
cause the envelope to curl, pick up excess
toner or seal the envelope.
L
Avoid printing below 10
°C with less than
30% RH, or it may cause light printing.
L
Store envelopes away from moisture and
humidity, where they can lay flat and their
edges will not be bent or damaged. The
humidity should not exceed 70% RH.
Backing sheet
Insert envelopes.
Adjust the
recording
paper
guides.