Petsafe Stay+Play Wireless Fence PIF00-12917 - Manual (Page 12)

12 1-800-732-2677 www.petsafe.net 13
Transmitter
Range Chart
Boundary
Control
Dial
Position
Boundary
Switch
LOW
Boundary
Switch
HIGH
1 17 ft. 35 ft.
2 19 ft. 41 ft.
3 22 ft. 49 ft.
4 25 ft. 55 ft.
5 29 ft. 64 ft.
6 36 ft. 82 ft.
7 42 ft. 95 ft.
8 45 ft. 105 ft.
Note: These distances are approximate.
Record Your
Settings
Final
Boundary
Switch
Setting
(HIGH or
LOW) Final
Boundary
Control
Dial
Position
(1-8) Receiver
Static
Correction
Level (1-6)
Home
Camping
Vacation
Other
Place the Boundary Flags
The Boundary Flags are visual reminders
for your pet of where the Boundary Zone is
located. The Receiver Collar will activate within
2 to 3 feet of the Boundary Flags.
1. Using the Test Light, with the Static
Correction Level set at 2 or greater, hold the
Receiver Collar at your pet’s neck height with
logo side facing away from the Transmitter.
2. Walk towards the Boundary Zone until the
Receiver Collar beeps and the Test Light
flashes (5A).
5A 5B
3. Place a Boundary Flag in the ground (5B).
4. Walk back into the Pet Area until the beeping stops.
5. Repeat this process around the Boundary Zone until it is marked with Boundary
Flags every 10 feet.
The Boundary Flags may be in different parts of the Boundary Zone and may not be in
a line. The Boundary Zone is 2 to 3 feet wide.
Step
5