Fit the receiver collar, Step – Petsafe Stay+Play Wireless Fence PIF00-12917 User Manual

Page 13

Advertising
background image

www.petsafe.net 13

Fit the Receiver Collar

Important: The proper fit and placement of your Receiver Collar is important for effective training.
The Contact Points must have direct contact with your pet’s skin on the underside of his neck.

Please read and follow the instructions in this manual. Proper fit of the collar

is important. A collar worn for too long or made too tight on the pet’s neck

may cause skin damage. Ranging from redness to pressure ulcers; this

condition is commonly known as bed sores.
• Avoid leaving the collar on the dog for more than 12 hours per day.
• When possible reposition the collar on the pet’s neck every 1 to 2 hours.
• Check the fit to prevent excessive pressure; follow the instructions in

this manual.

• Never connect a lead to the electronic collar; it will cause excessive

pressure on the contacts.

• When using a separate collar for a lead, don’t put pressure on the

electronic collar.

• Wash the dog’s neck area and the contacts of the collar weekly with a

damp cloth.

• Examine the contact area daily for signs of a rash or a sore.
• If a rash or sore is found, discontinue use of the collar until the skin has

healed.

• If the condition persists beyond 48 hours, see your veterinarian.
• For additional information on bed sores and pressure necrosis, please

visit our website.

These steps will help keep your pet safe and comfortable. Millions of pets

are comfortable while they wear stainless steel contacts. Some pets are

sensitive to contact pressure. You may find after some time that your pet is

very tolerant of the collar. If so, you may relax some of these precautions. It is

important to continue daily checks of the contact area. If redness or sores are

found, discontinue use until the skin has fully healed.
You may need to trim the hair in the area of the Contact Points. Never shave

the dog’s neck; this may lead to a rash or infection.

To assure a proper fit, please follow these steps:

1. Make sure Transmitter is not plugged in, and the receiver is

turned off.

2. Start with your pet standing comfortably (6A).

3. To make it easier to hear the warning beep, place the

Receiver Collar on your pet with the logo side of Receiver

facing your pet’s chin.

4. Center the Contact Points underneath your pet’s neck,

touching the skin.

6A

You may need to trim the hair in the area of the Contact Points. Never shave

the dog’s neck; this may lead to a rash or infection.

Step

6

Advertising