Philips AJ 3941 - Manual (Page 12)

ALARM
IMPORTANT !
If you want the alarm to wake you up, FIRST CHECK if:
– you have adjusted the volume loud enough when using the
CD / TRACK SELECT/ RADIO alarm modes;
– you have disconnected the headphones;
– the loudspeakers are switched on if you are using amplified
loudspeakers in the headphone socket.
You can program and set a TRACK SELECT number between
01-99, when the set is in the standby mode or during CD
playback.
However, if the track number programmed does not exist on your
CD, the first track of the CD will be played during the alarm call.
1. Insert a CD into the CD compartment
2. Press and hold down the selected ALM 1 or 2 button and set
your alarm time using the ∞ or § controls.
3. Before releasing ALARM, press the CD 2 button.
™ The display will show the CD icon under ALM 1 or
ALM 2
4. Hold down the TRACK SELECT button and select your track
number by pressing ∞ or §.
5. Release the TRACK SELECT and SEARCH
∞ or § controls
when you have found the desired track number.
6. To review your programmed track number, press TRACK
SELECT again.
™ The selected track number and alarm number will be
shown.
Note:
– The BUZZER alarm option will automatically replace the CD /
TRACK SELECT alarm if you have;
– inserted a CD incorrectly;
– inserted a damaged CD;
– forgotten to insert any CD.
•
SETTING TRACK SELECT
12
English
24 HRS RESET
TRACK
SELECT
PLAY
ALM1
ALM2 AM
SLUMBER
z
A BRIGH TNESS
COMPACT DISC CLOCK RAD
IO
ALM1 ON
IN
WEEKEND SLEEPER
BUZZER
AM
zz
ALM1
ALM
BRIGHTNESS
XP AJ 3940/3941/17.1 29-03-2001 10:57 Pagina 12