Controls installation – Philips AJ 3941 User Manual

Page 7

Advertising
background image

CONTROLS

INSTALLATION

7

English

1. Check if the power supply as shown on the type plate (on the

bottom of the set) corresponds to your local power supply. If it
does not, consult your dealer or service center.
™ If your set is equipped with a voltage selector, found on the

bottom right-hand corner of the set, adjust the selector to
correspond with your local power.

2. Connect the power plug to the wall socket.

– The power supply is now switched on and the numbers on

the display will start to flash. You will need to set the
correct time.

3. To switch off the power supply completely, pull the power plug

out of the wall outlet.

POWER CONNECTION

1 SLUMBER - to adjust the slumber time
2

DAY

/REPEAT ALARM

– to switch off the alarm for a 9 minute

period

– to set the day for weekend sleeper

activation

3 24 HR RESET - to stop the active alarm for

24 hours

4 PUSH•OPEN - to open/close the CD door
5 TRACK SELECT - to select/review TRACK

SELECT number for ALM 1 or 2

6 DISPLAY - to show the clock/alarm times

and status of the set

7 PLAY

2 - to start CD playback

8

9 OFF
– to stop CD/Radio/Slumber function
– to cancel the TRACK SELECT setting
– to cancel alarm setting(s)

9 DBB - for an enhanced dynamic bass boost
0 ALM 2 - to set/review/switch off ALM 2
! BRIGHTNESS - to change the brightness of

the display illumination

@ ALM 1 - to set/review/switch off ALM 1

#

∞ / §
– to adjust clock/alarm times;
– to set the day
– to skip CD tracks/search for a particular

passage

– to set a CD track for ALM 1 or ALM 2 in

TRACK SELECT mode

– to select the buzzer melody for ALM 1 or

ALM 2

$ WEEKEND SLEEPER - to deactivate ALM1

or ALM 2 for the weekend

% TIME - to set the clock time
^ BUZZER - to select the buzzer mode for

ALM 1 or 2 - to select the buzzer melody

& RADIO ON

– to switch on the radio
– to select radio mode for ALM 1 or ALM 2

* BAND - to select FM/AM waveband
( p - 3.5 mm socket for plugging in

headphones/active speakers

) VOLUME - to adjust the sound level
¡ TUNING - to tune to radio stations
Battery door - for backup batteries
£ Pigtail antenna - antenna to improve FM

reception

Power cord - for AC power supply

TOP, FRONTSIDE and BACK PANEL

XP AJ 3940/3941/17.1 29-03-2001 10:57 Pagina 7

Advertising
This manual is related to the following products: