Philips HTS3181 User Manual

Page 20

Advertising
background image

20

Repeat play a specifi c section

1

During playback, press INFO.

The disc status menu is displayed.

»

2

Select

[Repeat] in the menu, then press

.

3

Move to [Repeat AB] in the menu, then

press OK to set the starting point.

4

Press

OK again to set the ending point.

Repeat play starts.

»

5

To cancel repeat play, select [Off] and

press OK.

Note

The marked section for repeat play is only

possible within a track/title.

View video play from different camera
angles

1

During play, press INFO.

The disc status menu is displayed.

»

2

Select

[Angle], then press .

3

Press the Numeric buttons to select an

angle option.

Play changes to the selected angle.

»

Note

Applicable only to discs contain multi-angle

scenes.

[Track Digest]
Plays the fi rst few seconds of each track in a
disc.

[Disc Interval]
Divides the total disc time by six and play the
fi rst few seconds of these intervals.

[Track Interval]
Divides the current track by six and play the
fi rst few seconds of these intervals.
This option is not available in stop mode.

Tip

You can change the PBC setting (see ‘Adjust

settings’ > ‘Preference’ > [PBC]).

Sync audio output with video play

If the video play is slower than the audio
output (sound does not match with the
pictures), you can delay the audio output to
match the video.

1

Press and hold AUDIO SYNC until

‘AUDIO SYNC XXX’ is displayed. ‘XXX’
denotes the delay time.

2

Within fi ve seconds, press VOL +/- to set

the delay time for audio output.

Note

If the volume control is not used within 5

seconds, it resumes normal volume control
function.

EN

Advertising