Philips HTS3181 - Manual (Page 29)

29
[Speakers Volume]
Sets the volume level of each speaker to get
the ideal audio balance.
1) To start, press OK.
2) Select a speaker in the menu, then press
to adjust the volume level.
3) Press OK to confi rm and exit.
Note
The test tone is emitted from the speaker •
which you adjust.
[Speakers Delay]
Sets the delay time for the center and rear
speakers if they are placed closer to the
listening position, so that the sound output
from all speakers reach the listening position
at the same time.
1) To start, press OK.
2) Select a speaker in the menu, then press
to set the delay time.
3) Press OK to confi rm and exit.
Note
Allow 1ms setting for every 1 foot distance •
between the speaker and the listening position.
[Night Mode]
Makes loud sound level softer and soft sound
level louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
•
[On] – Enjoys quiet viewing at night.
• [Off] – Enjoys surround sound with a full
dynamic range.
Note
Applicable only to Dolby Digital encoded discs. •
[Sleep Timer]
Switches to standby automatically after the
preset time.
•
[15 mins], [30 mins], [45 mins], [60 mins]
– Selects the count down time before the
Home Theater System switches to standby.
• [Off] – Disables sleep timer mode.
[DivX(R) VOD Code]
Displays the DivX® registration code.
Tip
Enter this Home Theater System DivX •
registration code when you rent or purchase
video from www.divx.com/vod. The DivX videos
rented or purchased through the DivX® VOD
(Video On Demand) service can be played only
on the device to which it is registered.
Audio setup
1
Press SETUP.
» [General Setup] menu is displayed.
2
Press to select [Audio Setup], then
press .
3
Select an option, then press OK.
4
Select a setting, then press OK.
To return to the previous menu, •
press BACK.
To exit the menu, press
• SETUP.
Note
See the explanations of the above options in •
the following pages.
Speakers Volume
Speakers Delay
Night Mode
CD Upsampling
Audio Setup
English
EN