Philips DC200/93 - Manual (Page 13)

™ Selections are follows (time in minute):
120
=90=60=30=15=OFF=120
2 The set will turn off automatically at the selected time.
3 To cancel sleep, press either:
– POWER
– SLEEP once or more until OFF appears on the display.
Helpful hints: In standby mode, you can press SLEEP to switch on the set and
directly set the sleep function.
CONNECTING AN EXTERNAL DEVICE
You can listen to the sound of the connected external device through your
DC200’s speakers.
1 Press SOURCE repeatedly to select AUX mode.
2 Use the supplied AUX-IN cable to connect DC200’s AUX IN jack to
an AUDIO OUT or headphone jack on an external equipment (such as
CD player, or VCR).
MAINTENANCE & SAFETY
• Install the unit near the AC outlet and where the AC power plug can
be easily reached.
• Where the MAINS plug or an appliance coupler is used as the discon-
nect device, the disconnect device shall remain readily operable.
• The apparatus shall not be exposed to dripping or splashing.
• Do not expose the set to humidity, rain, sand or excessive heat caused
by heating equipment or direct sunlight.
• To clean your set, use a soft damp cloth or chamois leather. Do not
use cleaning products, which contain benzene, thinner, etc. as these may
harm the housing.