Plantronics CT14 - Manual (Page 11)

16 17
en
Phonebook
The phonebook in the dial pad holds up to 70 names and numbers. When the
phonebook is full, the dial pad beeps and shows Memory Full on the display.
You will not be able to add any names and numbers in the dial pad phonebook
until you delete some of the existing ones.
Creating Phonebook Entries
1 With the phone in standby, press .
2 To create a new phonebook entry, press .
3 Select the Create New menu.
Edit Name appears.
4 Use the keypad to enter a name
for this entry.
The name can contain up to 16 characters.
(See Entering Text from Your Dial Pad on next page.)
5 Press when you are finished.
NOTE If you do not want to enter a name for this entry, your phone will store this entry
as No Name.
6 Enter the number for this entry (Edit Number).
Use the number keypad to enter the phone
number; the phone number can contain up
to 20 digits.
If you need the phone to pause between
digits when it’s dialing (for example, to
enter an extension or an access code), press
to insert a two-second
pause. You will see a P in the display. You can also use more than one pause
together if two seconds is not long enough. Each pause counts as one digit.
7 Press when you are finished.
Phonebook
Entering Text from Your Dial Pad
You can use the number keypad on your dial pad to enter text by referring to the
letters printed on each number key.
When you press the number key in a text entry field, the phone displays the first
letter printed on the number key.
Press the number key twice to display the second letter and three times to display
the third.
When [Aa] appears on the display, capital letters are displayed first, then
lower case letters, and then the number on the key.
When [aA] appears on the display, lower case letters are displayed first, then
the number on the key, and then capital letters.
When you input the first letter or a letter after a blank space, the default
mode is [Aa]. From the next letter, the mode changes to [aA] automatically.
You can switch back and forth the mode manually between [Aa] and [aA].
Press
; the case (small/capital) of the letter entered changes also.
If two letters in a row use the same number key, enter the first letter, then use
to move the cursor to the next position to enter the second letter.
Press to end your text entry.
If you make a mistake while entering a name, use or to move the cursor
to the incorrect character. Press to erase the wrong character, and then
enter the correct character. To delete all characters, press and hold .