Plantronics CT14 - Manual (Page 7)

8 9
en
Placing, Receiving and Ending Calls
Placing Calls
Press
and listen for the dial tone. Dial the number.
OR
Dial the number and then press .
Receiving Calls
1 Press .
(If Any Key Answer is on, press any key on the dial pad.)
2 If dial pad is on base, pick up the dial pad and press .
(If Auto Talk is on, the phone will answer when you pick up the dial pad
from the base.)
For information on setting up Any Key Answer or Auto Talk, see page 11.
Ending Calls
Press or return the dial pad to the base.
Adjusting Volume and Muting Calls
Adjusting Volume
You can adjust the headset listening volume while you are on a call using
or . You can choose from six volume levels.
Muting Calls
1 During a call, press .
Mute On appears briefly on the display
2 The mute icon will also appear in the display
and remain on the screen until muting is canceled.
3 To cancel muting, press again.
Mute Off appears briefly and the mute icon will disappear.
Traveling Out-of-Range
Your CT14 has a range of up to 300 ft. from the charging base. If you travel out of
range while the dial pad is in standby, the dial pad will display Out Of Range, and
you will not be able to place/answer calls.
If you travel out of range while on a call, the dial pad will beep, display Out Of
Range, and then go to standby. The base will maintain the connection for
30 seconds after the dial pad goes out of range.
If you move the dial pad back within range of the base within 30 seconds, press
to pick up the call again.
Settings
Language Setup
Your dial pad supports three languages: English, French and Spanish. The default
language is English.
1 To select a different language, press .
2 Use or to select Handset Setup menu, then press .
3 Use or to select Handset Language submenu, then press .
4 Move the cursor to choose English, Français (French) or Español
(Spanish).
5 Press to confirm.
Time and Day Setup
1 To change the day or time shown in the display, press .
2 Move the cursor to Day & Time and press .
3 Use or to select the day of the week, and press .
4 Use the number keypad (0 through 9) to enter the hour and minutes.
5 Use or to select AM or PM, and press .
You will hear a confirmation tone.
NOTE With the phone in standby, the day of the
week does not appear on the dial pad display.