Panasonic CW-XC122VU - Manual (Page 5)

3
PA
R
T
IDENTIFICA
TION
4
PREP
ARA
TION BEFORE
OPERA
TING
ACCESSORIES
• Remote control • Two R03 dry-cell batteries Be sure to observe the following:
• Aim remote control at control
panel on air conditioner when
operating.
• Do not drop or throw the remote
control.
• Do not place the remote control
in a location that is exposed to
direct sunlight or next to a heating
unit or other heat sources.
OFF/ON OPERATIO N TEMP/TIMER
COOL FAN HIGH MED LOW
MODE
FAN SPEED
SET TIMER
SET/ CANCEL AIR SWING ECONOM Y
hr ° F
Wireless R emote C o ntrol
• Maximum distance : 10 m
Panasonic
AIR SWING
MODE
OPERATION
FAN SPEED
ECONOMY
SET/
CANCEL
TEMP/TIMER
TIMER
1 Signal Transmitter
2 OPERATION button
3 TEMPERATURE/TIMER setting button
4 TIMER button
5 TIMER SET/CANCEL button
6 MODE selection button
7 ECONOMY Button
8 AIR SWING button
9 Fan Speed Selection Button
REMOTE CONTROL 1
2
3
5
7
9
6
8
4
NOTES
• If the unit is not going to be used for an extended period of time, remove the
power plug. Otherwise, approximately 2.5W of electricity will be used even if the
unit has been turned off using the remote control.
• If operation is stopped, and to be restarted immediately, the unit will resume
operation only after 3 minutes.
ABOUT THE BATTERIES
WARNING
3 1
Open the cover.
HOW TO INSERT BATTERIES
Insert the two batteries.
2
Do not use rechargeable (Ni-Cd) batteries
because such batteries differ from the standard
dry cell batteries in shape, dimension and
performance.
Close the cover.
CAUTION
Ensure that the power
plug is securely inserted.
A loose plug may cause a
fire or an electric shock.
• The batteries can be used for approximately one year.
• Be sure to replace the batteries with two new identical
batteries.
• Remove the batteries if the air conditioner will not be used
for an extended period of time.
5
AIR CONDITIONER OPERA
TION
OPERATING THE UNIT
Start operation by pressing
OPERATION.
The operation will turn on and the
display panel will light up.
To stop the operation, press the
OPERATION again.
The unit will stop operating and the
display panel light will turn off.
SELECTING OPERATION MODE
Press MODE to select the desired
operation .
The indicator will light up and a “beep”
sound will indicate changing setting.
COOL mode
To set room temperature to your
preference of cooling comfort.
FAN mode
To provide air circulation without cooling
the room.
During Fan operation, temperature
setting cannot be selected.
SETTING DISPLAY TEMPERATURE
Press TEMP/TIMER ▲ or ▼ to set the
display temperature.
The temperature can be set between
60°F and 86°F.
Recommended temperature:
75°F ~ 78°F.
Display will
change
according to
the setting.
NOTES
• The latest temperature setting will be memorized and will
appear on the display the next time it’s turned on.
• The display temperature selection is for display purpose only
and does not indicate actual room setting temperatures. Your
room temperature may not necessarily match the displayed
temperature.
SELECTING FAN SPEED
Press FAN SPEED to choose the
speed level of the fan.
The indicator will light up and the “beep”
sound will indicate changing setting.
Vertical
louvers
ADJUSTING HORIZONTAL AIR FLOW DIRECTION
Press to select AIR SWING.
The air circulation will automatically move the
horizontal louvers left and right for better air
distribution around the room.
NOTE
Using your hands to adjust the direction may cause
the louvers to malfunction. If this happens, stop
operation immediately and restart.
NOTE
Vertical adjustment of the airflow direction
is done manually.
NOTE
• The latest fan speed setting will be memorized and the indicator
will light up the next time the unit is turned on.
OFF/ON
OPERATION
OPERATION
TEMP/TIMER
COOL
FAN MODE
TEMP/TIMER
hr
° F
hr
° F
hr
° F
FAN SPEED
AIR SWING
MODE
HIGH
MED
LOW
FAN SPEED
AIR SWING
COOL
FAN
HIGH
MED
LOW
OFF/ON
OPERA TION TEMP/TIMER
COOL
FAN
HIGH
MED
LOW
MODE
FAN SPE ED
SET
TIMER
SET/ CANCEL
AIR SWIN G ECONOM Y
hr
° F
Wireless R emote C o ntrol