Panasonic CF-VDR302U - Manual (Page 17)

17
E
If “Easy Media Creator” does not operate properly, we recommend carefully reading the
online help fi le fi rst for problems with the operating environment or operations.
Then install the latest Windows Service Pack.
If you still cannot troubleshoot the problem, contact Panasonic Technical Support.
For further information, refer to the following URL.
http://www.roxio.com/
Information
Windows Vista
If a standard user has written a fi le to an unformatted CD-RW, formatting may be per-
formed without display of the format confi rmation and progress bar. Wait until the prog-
ress bar for fi le writing appears.
Do not click [Cancel] while formatting a CD-RW.
Do not click [Cancel] while writing fi les to an unformatting a CD-RW.
In the following cases, click
(Start) - [Computer], right-click [DVD/CD RW
Drive(X:)], select [Disable Drag-to-Disc for this drive] from the menu and disable Drag-
to-Disc.
• When you perform the standard format procedure prepared by Windows Vista.
• When you write to a disc formatted by the above procedure.
When you restart your computer, Drag-to-Disc is enabled again even if it is disabled ac-
cording to the above procedure. Resetting Drag-to-Disc to disable is necessary.