Panasonic UB-5838C - Manual (Page 20)

Scanning
20
6 Press the Mode Key ( ).
• The Screen Erase Announce is shown on the
display.
7 After erasing the written text/diagrams on the
screen, press the Mode Key (
) to return to
standby mode.
• Only remove the SD memory card once you
have returned to standby mode.
• To remove the SD memory card, open the SD
memory card cover and unlock the SD
memory card by pressing it once. Once it is
unlocked you may remove it.
• For information on saving files on an SD
memory card, refer to page 17.
1 Set the power switch to on ( I ).
2 Turn the external printer on and load the paper.
3 Connect the external printer to “USB
Connector-A for Printer” with a USB cable.
• The printer icon is shown on the display.
The display below is an example of the unit in
standby mode.
4 Press the Mode Key to select the
scanning mode.
5 When making multiple copies, press the Set-up
Key
, then press the Advance Key ( )
repeatedly to select the desired number of
copies (1 to 9).
• For details on making multiple copies, refer to
page 24.
Printing with an external
printer
Printer
UB5838C-PJQXC0259ZA_mst.book 20 ページ ２００９年５月２６日 火曜日 午後２時５９分