Panasonic UB-5838C - Manual (Page 52)

Wall-Mounting Construction
52
● Plasterboard walls
Split-wing toggles (sold in stores) are needed.
● Wooden walls
Wood screws (sold in stores) are needed.
Insert the bolt through the hole in the wall-mounting
fixture and attach the split-wing toggle. Then insert
the split-wing toggle into the hole while the arms are
horizontal.
For the correct hole size, refer to the instructions for
the particular split-wing toggles used.
After the arms expand, pull the wall-mounting fixture
out until the arms of the split-wing toggle grip firmly
into the wall.
Tighten the bolt until the wall-mounting fixture is
securely fixed to the wall.
Plasterboard
Split-wing toggle
Wall-mounting
fixture
Bolt
Arms
Arms
Insert the wood screw through the hole in the wall-
mounting fixture and tighten until the wall-mounting
fixture is securely fixed to the wall.
For the correct hole size, refer to the instructions for
the particular wood screws used.
Wall-mounting fixture
Wood screw
Wooden wall
UB5838C-PJQXC0259ZA_mst.book 52 ページ ２００９年５月２６日 火曜日 午後２時５９分