Panasonic WV-BP550 - Manual (Page 18)

-16-
Left Button
Set Switch
Right Button
Down Button
Up Button
Up Button ( ) : This button is used to move the
cursor upwards. Use this button to
select an item or adjust the para-
meters.
Down Button ( ) : This button is used to move the
cursor downwards. Use this but-
ton to select an item or adjust the
parameters.
Right Button ( ) : This button is used to move the
cursor to the right. Use this button
to select or adjust the parameters
of the selected item. The parame-
2. SETUP OPERATION
This camera utilizes a user setup menu (CAM SET UP)
that is displayed on the monitor.
To set items on the CAM SET UP menu, use the follow-
ing buttons on the side panel.
ter changes each time this button
is pressed.
Left Button ( ) : This button is used to move the
cursor to the left. Use this button
to select or adjust the parameters
of the selected item. The parame-
ter changes each time this button
is pressed.
Set Button ( ) : This button is used to set the
determined parameter. If the item
has its own setting menu (
indi-
cates that the setting menu
exists), press this button to dis-
play the setting menu.
• All Reset Operation
All Reset allows you to reset all setup menu items to
the factory settings if you are unsure about the correct
settings. Proceed as follows:
(1) Make sure that the CAM SET UP menu is not dis-
played (a camera picture is displayed).
(2) While pressing both and , press for a
few seconds. The words ALL RESET momentarily
appear on the monitor.
At this time all adjustments and parameters are
reset to the factory default settings.