Panasonic WV-BP550 - Manual (Page 22)

-20-
2. Move the pointer to the character to be edited by
pressing or . Then move the cursor to the
character area and select a new character.
3. Press to determine the CAMERA ID.
To erase all characters in the editing area
Move the cursor to RESET and press . All charac-
ters in the editing area disappear.
To determine the display position of the CAMERA
ID
1. Move the cursor to POSI, and press . The dis-
play shown below appears and the CAMERA ID
starts blinking.
Blinking
2. Move the CAMERA ID to the desired position by
pressing / / / .
3. Press to fix the position of the CAMERA ID.
The mode returns to the previous CAMERA ID
menu.
Notes:
• The CAMERA ID stops at the edges of the
monitor screen.
• The CAMERA ID moves faster if any of /
/ / is kept pressed for a second or
longer.
To return to the CAM SET UP menu
Move the cursor to RET and press . The CAM SET
UP menu appears.
2. Light Control Setting (ALC/ELC)
You can select the light control mode according to the
lens type.
ALC: If you use the auto iris lens, select this parameter.
ELC: If you use a fixed or manual iris lens, select this
parameter.
1. Move the cursor to the ALC/ELC parameter.
2. Select ALC or ELC.
WV-BP550
** CAM SET UP **
CAMERA ID OFF
ALC/ELC ALC
SHUTTER ---
AGC ON
SENS UP OFF
SYNC INT
MOTION DET OFF
LENS DRIVE DC
END SET UP ENABLE
↵
↵
↵