Paradyne IP DSLAM GranDSLAM 4200 - Manual (Page 33)

2. Cabling
4200-A2-GN20-40 January 2004 2-9
Management Port
The MGMT (management) port can be used to connect the GranDSLAM 4200 to a
network management system using a 10BaseT or 100BaseT LAN. The MGMT
port is isolated and no user data is accessible over it. A straight-through cable is
used.
Procedure
To use the MGMT port:
1. Connect a modular 8-pin cable to the MGMT port.
2. If the GranDSLAM 4200 is in a rack, fasten the cable to a rail with a cable tie.
3. Connect the other end of the cable to your Ethernet hub or to a network
interface card in a PC.
02-17278
Hub Device
1
12
13
24
4 8
16 20
POWER
A
ALARM
RTN -48V DC
BITS
MGMT
CONSOLE
ST AT US
UPLINK
ALRM TEST
B
A
3.5 A 60
B
E1 MODULE
4202 TX
RX
120W
75W
MGMT
Port