Paradyne IP DSLAM GranDSLAM 4200 - Manual (Page 39)

2. Cabling
4200-A2-GN20-40 January 2004 2-15
Grounding Lug
Procedure
To connect the unit to a ground:
1. Strip back the insulation approximately 5/16 of an inch (8 mm) on 14 AWG
copper ground wire.
2. Loosen the screw on the grounding lug located on the side panel near the
front of the unit.
3. Insert the stripped end of the wire through the bottom of the grounding lug and
tighten the screw. Ensure that the screw makes contact with the stripped
portion of the wire.
4. Attach the ground wire to an earth ground.
02-17270
1
12
13
24
DSL POR TS 1-24
POTS 1-24
4 8
16 20
POWER
A
ALARM
RTN -48V DC
BITS
MGMT
CONSOLE
ST A TUS
UPLINK
A L R M T E S T
B
A
3.5 A 60
B
E1 MODULE
4202 TX
RX
120Ω
75 Ω