Paxar Handi Print 6017 User Manual
Page 26
A-2 Specifications
Memory:
32K SRAM and 128K Flash
Charging
Time:
Approximately 3 hours with no printing
Comm:
RS-232 port
Print Ratio: 25% black maximum per square inch
S u p p l y S p e c i f i c a t i o n s
Type:
Thermal direct receipt paper
Thickness: 2.2 to 3.5 mils (receipt paper)
Width:
3.125 inches (79 mm)
Length:
1.0 inch (25.4 mm) minimum feed
8.0 inch (203 mm)
1 roll of receipt paper is approximately 600
inches (15,240 mm)
Sensing:
Black mark (on the face of the supply)
Roll
Diameters:
Inside: .25 inches (6 mm)
Outside: 1.5 inches (38 mm)
Maximum
Print Area:
2.85 inches (72 mm) by 8.0 inches (203 mm)
NOTE: Maximum length depends on format.
O p t i o n s
♦
Magnetic Card Reader (factory-installed)
♦
Printer Stand (120611)
♦
Belt Clip (120296)
♦
Monarch 9462 Single Station Battery Charger
(can be wall-mounted)
♦
Monarch 9464 Four Station Battery Charger
WARNING
Use only the above Monarch chargers designed for
lithium-ion batteries when charging. The battery might
explode if placed on a different charger. To order a
replacement battery, use part number 12009502.