Paxar Handi Print 6017 User Manual
Page 28
Advertising
A-4 Specifications
For Wall-Mounting:
Wall-mounting hardware is not
included.
Use two screws or nails that support
at least 5 pounds (2.3 kg.).
1. Place the unfolded stand against the wall.
2. Use a pencil to mark inside the two keyholes for the
screws or nails.
3. Attach the screws or nails through the keyholes and
into the wall.
4. Slide the printer into the stand until the button
catches in the stand.
5. Adjust the height of the stand by moving the wire bar
into different grooves if you notice glare on the
handheld’s display.
Keyhole
Advertising