Paxar Handi Print 6017 - Manual (Page 9)

Getting Started 1-5
8. Lock the battery door by pushing up the battery tab.
9. Thread the strap through the slot and secure the
strap at the VELCRO tab. Make sure the strap is
adjusted to fit your hand.
10. Charge the battery.
To remove the battery, open the battery door and tip the
battery out of the printer.
C h a r g i n g t h e B a t t e r y
The battery can be charged
♦ inside the printer using the AC power adapter
provided.
♦ in the optional single station or four-station
charger.
Similar to a cordless phone battery,
the printer’s battery must be charged
before using it.
You can print while the battery is charging; however, the
battery may not receive a full charge.
You can also charge the handheld while it is connected to
the printer. However, the batteries (printer and
handheld) may not receive a full charge.
WARNING
Use only Monarch chargers (Monarch 9462 Single
Station Charger or the Monarch 9464 Four Station
Charger) designed for lithium-ion batteries when
charging. The battery might explode if placed on a
different charger. To order a replacement battery, use
part number 12009502.
To print with the AC power adapter connected, you must
have a battery inside the printer.