Philips DVDR 77/00 - Manual (Page 35)

27
9
Use a component video (Y Pb Pr) cable, connect the three cinch
sockets (red, blue, green) COMPONENT VIDEO OUT at the back
of the DVD recorder with the corresponding three component video
input sockets of your TV set, usually labelled 'Component Video
Input', 'YUV Input', 'YPbPr', 'YCbCr' or simply 'YUV'.
Warning!
Do not confuse these sockets with the five-component RGB sockets
(if available) or the yellow video (CVBS/FBAS) socket and the two
audio sockets (red/white). The five-component RGB sockets are only
provided for the R-G-B-H-V signals (red, green, blue with horizontal
and vertical synchronisation impulse).
Please observe the colour sequence
The colours of the sockets at the DVD recorder and the connectors must
match
those of the socket colours at the TV set
(red-red/blue-blue/green-green). If they don't, the colours of the picture may
get mixed up or the picture may not be visible.
Tip
0
Use an audio (cinch) cable, connect the red/white cinch socket
AUDIO L/R OUT at the back of the DVD recorder with the mostly
red/white audio input socket of your TV set (usually labelled 'Audio in'
or 'AV in'. See the instruction manual of your TV set.)
A
If necessary, switch your TV set to the component video input socket.
Also consult the instruction manual of your TV set.
B
The menu of the DVD recorder should now appear on the TV
screen. If not, check the cable connections and the settings on your
TV set.
Manual TV channel search
In some cases, not all of the available TV channels may have been found and stored during initial
installation. In this case, you will need to search for and store the missing or coded TV channels
manually.
Manual search with EasyLink
With 'Easy Link', the DVD recorder will automatically download the TV
channels stored on the TV set. This is why some lines have no function. To
store new TV channels, they must first be stored on the TV set. The
information will then be transferred to the DVD recorder automatically.
Tip
1
Switch on the TV set. If required, select the programme number for
the DVD recorder.
2
Switch on the DVD recorder using STANDBY-ON m .
ENGLISH
Installing your DVD recorder