Philips DVDR 77/00 - Manual (Page 97)

89
Programming recordings without the
ShowView
® System
1
Switch on the TV set. If required, select the programme number for
the DVD recorder.
2
Press TIMER s on the remote control.
The programming method selected last is marked.
Timer
Timer programming
Date
01 Prog.
BBC1 Start
20:15
VPS
PDC End
21:30
Rec
Mode
M1
Mo-Fr/Weekly
Press SELECT To store
Press OK
3
Select line 'Timer programming' with B or A . and confirm with
the C button.
The information will appear on the screen.
4
Select the input field with D or C .
5
Enter information with B or A or with the number buttons 0..9 .
Selecting daily/weekly recordings
In 'Date' use SELECT to select from the following options:
'
Mo-Fr': Repeated daily recordings from Monday to Friday
' Mon': Repeated weekly recordings (every week on the same day, e.g.
Monday).
Programme numbers of the ' EXT1' and 'EXT2'scartsocket
You can also programme recordings from external sources via scart socket
EXT 1 TO TV-I/O ('EXT1') or EXT 2 AUX-I/O ('EXT2').
'Switching on 'VPS/PDC' in the ' Start' inputfield
Select the 'Start' input field using TIMER s . Using SELECT switch on
'VPS/PDC' ('*' lights up). If you press SELECT again, you will switch
'VPS/PDC' off ('*' goes out).
Changing the recording quality in input field ' End'
Select the 'End' input field using C .
Use SELECT to select the recording mode.
Tip
6
If all information is correct, press the OK button. The programming
information is stored in a TIMER block.
7
To end, press TIMER s .
The disc you have inserted will be checked.
8
Search the position on the disc where the recording should begin.
9
Switch off with STANDBY m .
The programmed recording will only function properly if the DVD
recorder has been switched off using the STANDBY
m button.
If any of the TIMER blocks are in use, 'TIMER' will light up on the recorder display.
ENGLISH
Programming a recording (TIMER)