Panasonic KX-HGW600 - Manual (Page 129)

Operating Instructions
[For assistance, please call: 1-800-272-7033] 129
T
e
c
h
ni
cal
Gu
id
e
s
5.5 TCP/IP Properties Setup
To access the Camera Portal page using a web browser, you must set the TCP/IP
network protocol in each PC and enable the DHCP server function. Follow the steps
below and set up the PC.
For Windows 95, 98 and Me
1. Click [Start] [Settings] [Control Panel] [Network]
Select [TCP/IP] associated with your network card [Properties]
[Obtain an IP address automatically] [DNS Configuration tab]
[Disable DNS] [OK].
2. Click [OK] The System Settings Change dialog box appears.
3. Click [Yes] Restart the PC.
Your PC will be able to obtain an IP address from the KX-HGW600.
For Windows 2000
1. Click [Start] [Settings] [Control Panel] [Network and Dial-up
Connections] [Local Area Connection Icon] in use [Properties]
Select [Internet Protocol (TCP/IP)] [Properties] [Obtain an IP address
automatically] [Obtain DNS server address automatically].
2. Click [OK] several times if required.
For Windows XP
1.
Click [Start] [Settings] [Control Panel] [Network and Internet
Connections] [Network Connections] [Local Area Connection icon]
in use [Properties] Select [Internet Protocol (TCP/IP)] [Properties]
[Obtain an IP address automatically] [Obtain DNS server address
automatically].
2. Click [OK] several times if required.
Note
Log on with the administrator ID when using Windows 2000 and Windows XP to
access the TCP/IP Properties window.