English – 63, Basic operation – Panasonic PT-DZ12000E User Manual

Page 63

Advertising
background image

ENGLISH – 63

Basic Operation

OFF:

•

Geometry correction is not performed.

KEYSTONE:

•

This adjusts projected images when they are
distorted to a trapezoid.

CURVED:

•

This adjusts projected images when they are
distorted to a curved surface.

PC:

•

This is for performing geometry correction from a PC.

Select “KEYSTONE” or

3.

“CURVED” in Step 2, and then
press ENTER.

The “GEOMETRY:KEYSTONE” or

•

“GEOMETRY:CURVED” screen will be
displayed.

GEOMETRY:KEYSTONE
VERTICAL KEYSTONE

VERTICAL SUB KEYSTONE

0
0

GEOMETRY:CURVED
LENS THROW RATIO

VERTICAL KEYSTONE

0
0

Press

▲▼ to select the desired

4.

adjustment item, and press

◄►

to adjust the correction amount.

You can adjust the projection images as shown

•

below.

KEYSTONE menu:

VERTICAL KEYSTONE

•

VERTICAL SUB KEYSTONE

•

HORIZONTAL KEYSTONE

•

HORIZONTAL SUB KEYSTONE

•

LINEARITY

•

CURVED menu:

LENS THROW RATIO

•

Set the throw ratio of the lens you are using.
(pp. 22-24)
VERTICAL KEYSTONE

•

HORIZONTAL KEYSTONE

•

VERTICAL ARC

•

HORIZONTAL ARC

•

VERTICAL BALANCE

•

HORIZONTAL BALANCE

•

Note

If vertical keystone correction is set, menus and

•

logos may protrude out of the screen.

If both edge blending adjustment and geometry

•

correction are used, set the geometry correction
to curved-surface correction or PC. If geometry
correction is set to keystone-distortion correction,
edge blending adjustment cannot be made
correctly. (p. 66)

Advertising