Panasonic PT-DZ12000E - Manual (Page 71)

ENGLISH – 71
Special Featur
es
Press ENTER. 5.
The “3COLORS:RED”, “3COLORS:GREEN” or •
“3COLORS:BLUE” screen will be displayed.
If you selected “7COLORS”, the
“7COLORS:RED”, “7COLORS:GREEN”,
“7COLORS:BLUE”, “7COLORS:CYAN”,
“7COLORS:MAGENTA”, “7COLORS:YELLOW”,
or “7COLORS:WHITE” screen will be
displayed.
3COLORS:RED
RED
GREEN
BLUE
2048
0
0
Press
◄► to adjust the values.
6.
These values can be adjusted from 0 to 2 048. •
Note
The effects of correcting the adjustment colour: •
When tuning the correction colour that is the same
as the adjustment colour: the brightness of the
adjustment colour changes.
When tuning the correction colour RED: RED is
added to or reduced from the adjustment colour.
When tuning the correction colour GREEN: GREEN
is added to or reduced from the adjustment colour.
When tuning the correction colour BLUE: BLUE is
added to or reduced from the adjustment colour.
This adjustment should be carried out by a person •
who is familiar with the projector or by a service
person because a high level of skill is required to
make successful adjustment.
Pressing DEFAULT will restore the factory defaults •
for all items.
When any setting other than “OFF” has been •
selected for colour matching, the “COLOR
TEMPERATURE” setting is fixed at “USER1”.
Adjusting the colour matching
using a colorimeter
The “RED”, “GREEN”, “BLUE”, “CYAN”, “MAGENTA”,
“YELLOW” and “WHITE” colours can be changed to
the desired hues using a colorimeter which is capable
of measuring the chromaticity coordinates and
luminance.
Inputting the current luminance
„
and chromaticity coordinates
Press
▲▼ to select “COLOR
1.
MATCHING”.
DISPLAY OPTION
COLOR MATCHING
LARGE SCREEN CORRECTION
OFF
OFF
Press
◄► to select
2.
“MEASURED” or “709MODE”.
Press ENTER. 3.
The “MEASURED MODE” screen will be •
displayed.
MEASURED MODE
MEASURED DATA
TARGET DATA
AUTO TESTPATTERN
ON
Press
▲▼ to select “MEASURED
4.
DATA”.
Press ENTER. 5.
The “MEASURED DATA” screen will be •
displayed.
MEASURED DATA
BLACK Y(RELATIVE)
x
y
RED Y(RELATIVE)
x
y
GREEN Y(RELATIVE)
x
y
BLUE Y(RELATIVE)
x
y
1
0.35
0.36
1400
0.67
0.33
5099
0.35
0.63
500
0.15
0.05
1/2
Use the colorimeter to 6.
measure the luminance (Y) and
chromaticity coordinates (x, y).
Press
▲▼ to select the colours, and
7.
press
◄► to select their values.
After all the data has been input, 8.
press MENU.
The “MEASURED MODE” screen will be •
displayed.
MEASURED MODE
MEASURED DATA
TARGET DATA
AUTO TESTPATTERN ON
Inputting the coordinates of a
„
desired colour (only “MEASURED”)
Press
▲▼ to select “TARGET
9.
DATA”.
Press ENTER. 10.
The “TARGET DATA” screen will be displayed. •
TARGET DATA
RED x
y
GREEN x
y
BLUE x
y
CYAN x
y
MAGENTA x
y
YELLOW x
y
0.64
0.33
0.3
0.6
0.15
0.6
0.225
0.329
0.321
0.154
0.419
0.505
1/2