Panasonic KX-PS8000 - Manual (Page 16)

One of the following can be used:
■SCSI interface requirements
■Parallel interface requirement
Based on the IEEE P1284-C standard
(An ECP compatible parallel port is recommended
for Windows 95. To turn on the ECP mode, use the
computerÕs BIOS setup. Refer to the computerÕs
manual for details.)
SCSI-2 (FAST SCSI) compatible ( ☞ P. 157)
16
SCSI cable
Interface
ASPI manager
ASPI Manager is required.
(Refer to the SCSI-2 board manual.)
Before You Start
System Requirements
PC
Interface
To operate the KX-PS8000 Enhanced system effectively, see the following.
CPU: More than Pentium or Pentium PRO
(133 MHz or faster CPU is recommended.)
Operating System: Windows ¨ 3.1* 1 , Windows 95* 2 or Windows NT ¨ 4.0* 3 * 4
(Intel only)
RAM: 16 MB or more (More than 32 MB is recommended.)
Free disk space: 100 MB or more
Virtual memory: 16 MB or more (More than 32 MB is recommended.)
for Windows 3.1/95
50 MB or more*
5 (More than 100 MB is recommended.)
for Windows NT 4.0
Display: Video card that can display more than 256 colors.
(A video card that can display more than 32,000 colors is
recommended.)
Drive: CD-ROM drive
* 1 Microsoft
Ò WindowsÒ operating system Version 3.1 (hereafter Windows 3.1)
* 2 Microsoft Ò WindowsÒ 95 operating system (hereafter Windows 95)
* 3 Microsoft ¨ Windows NT ¨ Workstation operating system, and Microsoft ¨ Windows
NT ¨ Server network operating system Version 4.0 (hereafter Windows NT 4.0)
* 4 Service Pack 3 or later version is required.
* 5 In the Virtual Memory window, change this setting in the Initial Size box.
SCSI-2 board
ASPI Manager compatible SCSI-2 board
(Adaptec AHA-2940 is recommended.)