Panasonic KX-PS8000 - Manual (Page 88)

88
Main Menu
Basic Operations
Printer Menu Mode
The printer Menu mode includes a Main menu, Item menu, Selection 1 menu and
Selection 2 menu which can be changed from the printer panel.
When Ready is displayed in the upper line of the LCD, pressing the MENU/EXIT
button will allow you to enter the Menu mode.
Once in the Menu mode:
B
Press the
F
/CONTINUE button to:

Display the next menu.

Display the next item.

Increase the numerical value of the selection by 1 or display the next selection.
B Press the I /CANCEL button to:

Display the previous menu.

Display the previous item.

Decrease the numerical value of the selection by 1 or display the next selection.
B
Press the ENTER button to:

Enter a sub - menu.

Activate a selection.

Print a Configuration/Maintenance/Color Calibration Page.
Before you attempt to change any settings, check the factory default settings in the
following table. For details on changing the settings, refer to Outline for Operation
( ☞ P. 91) .
Once you have changed the printer panel settings, they are automatically saved as
user default settings even if the power is turned off.
Item Menu
Test Page
Selection 2 Menu Selection 1 Menu
Configuration Page
Calibration Offset
CYAN
MAGENTA
YELLOW
BLACK
Calibration Test Print
Reset Calibration
0* 1 (-5 to 5)
0* 1 (-10 to 10)
0* 1 (-10 to 10)
0* 1 (-10 to 10)
0* 1 (-10 to 10)
YES
NO
Color Calibration
* 1 Factory default setting (continued)
Maintenance Page CYAN
MAGENTA
YELLOW
BLACK