Panasonic SC-AK62 - Manual (Page 12)

Before using
12
RQT5769
A
B
AUTO OFF
DISPLAY/
DEMO
DISPLAY/
DEMO
Turning the demo function off
If the clock has not been set, a demonstration of the display is shown
when the unit is switched to standby.
This function is set to on at the time of purchase.
Press and hold [-DISPLAY/–DEMO] until “NO DEMO” is
displayed.
The display changes each time the button is held down.
NO DEMO (off)
↔ DEMO (on)
Auto-off function
by remote control only
When CD or tape is selected as the source
To save power, the unit turns off if it is left unused for ten minutes.
Press [AUTO OFF].
“AUTO OFF” is shown on the display.
Note
This function does not work if the source is tuner, AUX 1/2 (SC-AK66
and SC-AK62: AUX) or 6CH INPUT.
To cancel
Press [AUTO OFF] again to clear “AUTO OFF” from the display.
For your reference
The setting is maintained even if the unit is turned off. When the unit
is turned on again, “AUTO OFF” is displayed and the unit functions as
described above.
If you select tuner, AUX 1/2 (SC-AK66 and SC-AK62: AUX) or 6CH
INPUT as the source, “AUTO OFF” goes out. It comes on again when
you select CD or tape.
A
B
12-13 AK77/66/62 [P/PC] 13/7/01, 1:49 pm 12