Panasonic SC-AK62 - Manual (Page 13)

Before using
13
RQT5769
1
2
3
4
SC-AK77
SC-AK66
1
2
4
3
SC-AK62
Setting the time
This is a 12-hour display clock.
This example in the figure shows how to set the time for 4:25 p.m..
Switch on the power.
Press [CLOCK/TIMER] to select “CLOCK”.
Every time you press the button:
CLOCK REC PLAY
(within 7 seconds or so)
Press [TUNE/TIME ADJ ( 3) or (4)] to show the
present time.
Press [CLOCK/TIMER] to finish setting the time.
The display will return to whatever was displayed before you
set the time.
To display the time when system is ON
Press [CLOCK/TIMER] to select “CLOCK”.
To display the time when system is OFF
Press [CLOCK/TIMER].
The time will be displayed for about 5 seconds and then the display
will return to whatever was previously displayed.
Note
The clock may lose or gain some time over a period. Readjust if
necessary.
Previous display
12-13 AK77/66/62 [P/PC] 13/7/01, 1:49 pm 13