Ab c, Before recording (deck 2 only) – Panasonic SC-AK62 User Manual

Page 22

Advertising
background image

22

RQT5769

Cassette deck operations

Recording operations

A

B

C

only

SC-AK77

1

3

2

4

Listening to tapes

To fast-forward or rewind the tape

Press [g/(] or [)/f] in the stop mode.

SC-AK77

Tape direction

To rewind

To fast-forward

“ 3”

[g/(]

[)/f]

“4”

[)/f]

[g/(]

SC-AK33

To rewind

To fast-forward

[g/(]

[)/f]

To find the beginning of a program
(TPS: Tape Program Sensor)

TPS finds the beginning of a track and resumes play from there. Each
press increases the number of tracks skipped, up to a maximum of 9.

Press [g/(] or [)/f] during play.

Note

TPS may not operate correctly in the following situations:
If the interval between tracks is less than 4 seconds.
If there is noise between tracks.
If there are silent parts within tracks.

Tab for side “B”

Normal position tape

Hi-position tape

Tab for side “A”

Detection hole

To protect tapes against further recording

Side A

A

A

Before recording (Deck 2 only)

Types of tapes which can be recorded correctly

SC-AK77

Use normal and high position tapes.
Metal position tapes can be used, but the unit will not be able to
record or erase them correctly.
The unit automatically identifies the type of tape.

Use normal position tapes.
High position and metal position tapes can be used, but this unit will
not be able to record or erase them correctly.

Erasure prevention

The illustration shows how to remove the tabs to prevent recording.
To record on the tape again, cover as shown, being careful not to
cover the high position discrimination hole.

How volume, sound quality/field and surround
affect recording

The tape you are recording is not affected whatsoever by changes in
volume, sound quality/field and surround system.
In recording, sound quality/field and surround system are set auto-
matically to “FLAT”.

To erase a recorded sound

1. Press [TAPE, DECK 1/2].
2. Insert the recorded tape into deck 2.
3.

SC-AK77

only

Press [REV MODE] to select reverse mode.

4. Press [a REC/STOP].

Notes

You cannot record when [6CH INPUT] is selected.

You cannot open deck 1 while recording.

You cannot fast-forward or rewind one deck while recording with
the other.

B

To re-record

SC-AK66

C

SC-AK66

SC-AK62

SC-AK62

21-22 AK77/66/62 [P/PC]

13/7/01, 1:58 pm

22

Advertising
This manual is related to the following products: