Panasonic SC-AK62 - Manual (Page 9)

Before using
9
RQT5769
Concerning the remote control
Battery installation
Insert the batteries observing the correct polarities (e, d).
Use of batteries
• Align the poles (+ and –) properly when inserting the batteries.
• Do not mix old and new batteries or different types of batteries.
• Do not recharge ordinary dry cell batteries.
• Do not heat or disassemble the batteries. Do not allow them to
contact flame or water.
• Remove the batteries if the unit is not to be used for a long time.
• Do not keep together with metallic objects such as necklaces.
• Do not use rechargeable type batteries.
• Do not use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.
Correct method of use
Operation notes
• Do not place obstacles between the remote control signal sensor
and remote control unit.
• Do not expose the remote control signal sensor to direct sunlight or
to the bright light of a fluorescent light.
• Take care to keep the remote control signal sensor and end of the
remote control unit free from dust.
• If this system is installed in a rack with glass doors, the glass doors’
thickness or color might make it necessary to use the remote control
a shorter distance from the system.
To prevent damage
• Never place heavy items on top of the unit.
• Do not disassemble or reconstruct the unit.
• Do not spill water or other liquids into the unit.
B
A
A
R6, AA, UM-3
B
30 30 ˚ ˚
Remote control
signal sensor
Transmission
window
About 7 meters in front of
the signal sensor
08-09 AK77/66/62 [P/PC] 13/7/01, 1:44 pm 9