Paxar Model 9416 - Manual (Page 13)

Setting Up the Printer 2-1
S E T T I N G U P T H E P R I N T E R
You must configure the printer before printing formats.
The most common configuration options are listed in the following table:
Option Choices Default
Format Sending Mode As Needed/Always As Needed
Separators Enabled/Disabled Disabled
Preloading Enabled/Disabled Disabled
Print Mode
Continuous/On Demand Continuous
Supply Type Black Mark/Die Cut Black Mark
Ribbon With Ribbon/Without Without
1. Press from the Main Menu. You see
-=Config Menu=- --Esc to exit
1. Format Sending Mode
2. Press
← or → to move through the Configuration Menu.
2