Paxar Model 9416 - Manual (Page 15)

Setting Up the Printer 2-3
1. From the Config Menu, press ← or → until you see
2. Set Separators
2. Press Enter. You see
Set Batch Separators
1=Enabled, 2=DISABLED >
The current setting is displayed in all caps.
3. Press 1 or 2 to enable or disable the separators. The default is
Disabled. You return to the Config Menu.
U s i n g D a t a P r e l o a d i n g
The Preload Data function keeps any data you enter in memory when
enabled. The default is Disabled.
1. From the Config Menu, press ← or → until you see
3. Set Preloading
2. Press Enter. You see
Set Data Preloading
1=Enabled, 2=DISABLED >
The current setting is displayed in all caps.
3. Select 1 to retain data. If you press 2, the printer does not keep data
you previously entered in memory. You return to the Config Menu.