Paxar Model 9416 - Manual (Page 8)

1-4 User Manual
Auxiliary Pow er Supply
C o n n e c t i n g t h e C a b l e s t o a 9 8 2 5 P r i n t e r
1. Turn OFF the printer before you connect the keyboard’s cable.
2. Plug the 9-pin coiled keyboard cable into the adaptor cable.
3. Plug the 25-pin serial cable into the back of the
printer.
4. Tighten the screws on the cables.
5. Plug the auxiliary power
supply into the
adaptor cable as
shown.
6. Plug the power
supply into
an electrical outlet.
7. Turn ON the printer.
On the back of the
printer, press (I)
to turn on and (O)
to turn off the printer.
Keyboard Cable goes here