Paxar Model 9416 - Manual (Page 7)

Introduction 1-3
C o n n e c t i n g t h e C a b l e s t o a 9 4 1 6 P r i n t e r
1. Turn OFF the printer before you connect the keyboard's cable.
2. Plug the 9-pin coiled keyboard cable into the end of the adaptor
cable.
3. Secure the other end of the adaptor cable to the 9-pin port on the
printer. Tighten the screws on the cables.
4. Connect the power cord to the power supplies.
5. Connect the power supply (24V) to the printer.
6. Connect the small power supply (5V) to the adaptor cable's power
connector.
7. Turn ON the printer. The keyboard receives power from the auxiliary
power supply (5V).
Keyboard
Pow er Supply (5V)
Pow er
Connector
Adaptor
Cable
Printer’s
Pow er Supply
(24V)
Keyboard
Cable goes here
Pow er
Cords
ON/OFF
Sw itch
Optional Scanner
Cable