Panasonic BB-HCM403A - Manual (Page 10)

Operating Instructions
10
1.2 How to Turn on the Camera
The camera supports two power supply methods: via an AC adaptor (Model No.
BB-HCA2A: Option) and from a PoE hub through an Ethernet cable. To turn the
camera on/off, follow the instructions described below.
When using the AC Adaptor (Model No. BB-HCA2A: Option)
• Connecting the plug of the AC cord to the outlet turns the camera on.
• Disconnecting the plug of the AC cord from the outlet turns the camera off.
When using a PoE hub (Connecting the AC adaptor is not necessary.)
• Connecting the Ethernet cable to the Ethernet port on the PoE hub turns the
camera on.
• Disconnecting the Ethernet cable from the Ethernet port on the PoE hub turns
the camera off.
Note
• Using both the AC adaptor and PoE hub simultaneously will not cause the
camera to malfunction, but using either one of the two methods is
recommended.