Panasonic BB-HCM403A - Manual (Page 11)

Operating Instructions
11
1.3 Accessing the Camera
1. Start up the web browser on your PC.
2. Enter "http://IPv4 Address (or URL):Port Number" on the address bar, and
press [Enter] on the keyboard.
• When the port number is 80 (default), you do not need to include the port
number in the address. See page 40 for details about the port number.
• For IPv6 connection, see page 13 and page 14, and confirm that your
equipment meets the requirements.
Enter "http://(IPv6-registered URL):Port Number" on the address bar.
• If the camera image is not displayed, see "Camera Image/Page Display
Troubleshooting" on page 9 of Troubleshooting on the CD-ROM.
3. The Enter Network Password window is displayed. Enter the user name and
password that you set previously, and click [OK].
Note
• When [Permit access from guest users] is set on the Security:
Administrator page, the authentication window will not be displayed.
E.g. http://192.168.0.253:50000 (in IPv4)
http:// .viewnetcam.com:50000 (in IPv6)