5 changing the indicator display – Panasonic BB-HCM403A User Manual
Page 140
Operating Instructions
140
5.5
Changing the Indicator Display
The Indicator Control page allows you to select an operation for the indicator. There
are three options.
•
Always on
•
Turn the indicator on when the camera is accessed.
•
Always off
1.
Click [Indicator Control] on the Setup page.
2.
Select an option.
•
To turn indicator always on, check [Turn indicator on when camera is on]
(see page 8).
•
To turn indicator when the camera is accessed, check [Turn indicator on
during camera access].
•
To turn indicator always off, check [Never turn indicator on].
•
Clicking [Cancel] cancels your settings without saving changes.
Note
•
Selecting [Never turn indicator on] keeps indicator always off even if the
camera is connected to a network.
3.
Click [Save] when finished.
•
The new settings are saved.
•
When finished, "Success!" is displayed.
4.
Click [Go to Indicator Control page].
•
The Indicator Control page is displayed.