Panasonic DP-C266 - Manual (Page 6)

6
Safety Information
Operating Safeguards
Consumable Safeguards
Installation and Relocation Cautions
Operating Safeguards
Do not touch areas where these caution labels
are attached to, the surface may be very hot
and may cause severe burns.
Do not place any liquid container such as a
vase or coffee cup on the machine. Spilt water
can cause fire or shock hazard.
Do not place any metal parts such as staples
or clips on the machine. If metal and flammable
parts get into the machine, they can short-
circuit internal components and cause fire or
electric shocks.
If debris (metal or liquid) gets into the machine,
switch Off and unplug the machine
immediately. Contact the authorized Panasonic
dealer. Operating a debris-contaminated
machine can cause fire or electric shock.
Never open or remove machine covers that are
secured with screws unless specifically
instructed in the “Operating Instructions”. A
high-voltage component can cause electric
shocks.
Do not try to alter the machine configuration or
modify any parts. An unauthorized modification
can cause smoke or fire.
Never dispose of toner, Toner Cartridge or a
Toner Waste Container into an open flame.
Toner remaining in the cartridge can cause an
explosion, burns, and/or injuries. For disposal
or recycling information, contact your local
authorities, or your local waste officials.
Keep SD Memory Card/USB Flash Memory/
button battery/stamp out of the reach of children.
If an SD Memory Card/USB Flash Memory/button
battery/stamp is swallowed accidentally, get
medical treatment immediately. For battery
disposal or recycling information, please contact
your local authorities or your local waste officials.
CAUTION
Do not place the machine near heaters or
volatile, flammable, or combustible materials
such as curtains that may catch fire.
Do not place the machine in a hot, humid,
dusty or poorly ventilated environment.
Prolonged exposure to these adverse
conditions can cause fire or electric shocks.
Place the machine on a level and sturdy
surface that can withstand a weight of the
machine. (The machine weight without optional
unit : 161 kg / 354.3 lb) If tilted, the machine
may tip-over and cause injuries.
When relocating the machine, contact the
authorized Panasonic dealer.
When moving the machine, be sure to unplug
the power cord from the outlet. If the machine
is moved with the power cord attached, it can
cause damage to the cord which could result in
fire or electric shock.
Do not place a magnet near the safety switch
of the machine. A magnet can activate the
machine accidentally, resulting in injuries.
Do not use a highly flammable spray or solvent
near the machine. It can cause fire.
When copying a thick original, do not use
excessive force on the ADF Cover to press the
original against the Platen Glass. The glass
may break and cause injuries.
Never touch a labeled area. You can get burnt.
If a sheet of paper is wrapped around the heat
roller, do not try to remove it yourself to avoid
injuries or burns. Switch Off the machine
immediately and contact the authorized
Panasonic dealer.
Do not use conductive paper, Ex: folding
paper, carbon paper, and coated paper. When
a misfed paper occurs, they can cause a short-
circuit and fire.
Do not place any heavy object on the machine.
An off-balance machine can tip-over or the
heavy object can fall, causing damage and/or
injuries.
Keep the room ventilated when using the
machine for an extended period of time to
minimize the ozone density in the air.
When copying with the ADF open, do not look
directly at the exposure lamp. Direct eye
exposure can cause eye fatigue or eye injury.
When removing misfed paper, make sure that
no pieces of torn paper are left in the machine.
A piece of paper remaining in the machine can
cause fire. If a sheet of paper is wrapped
around the heat roller or when clearing a
misfed paper that is difficult or impossible to
see, do not try to remove it by yourself. Doing
so can cause injuries or burns. Switch Off the
machine immediately and contact the
authorized Panasonic dealer.
If accessing the inner components of the
machine to clear misfed paper, etc., exercise
care not to touch heated areas, or you may get
burned.