Polycom RMX DOC2548A User Manual
Page 38
Chapter 1- Hardware Description
1-32
Fabric Switch
Module (FSM
4000)
ERR
Red
ON - Major error on card.
Flashes - During card startup.
RDY
Green
ON - The card has completed
startup successfully.
Flashes - During card startup.
ACT
Amber
ON - At least one participant is
connected to a conference.
Flashes - During card startup.
MPM+ Card
ERR
Red
ON - Major error on card.
Flashes - During card startup.
RDY
Green
ON - The card has completed
startup successfully, after the ERR,
RDY & ACT LED’s have stopped
flashing.
Flashes - During card startup.
ACT
Amber
ON - At least one participant is
connected to a conference.
Flashes - During card startup.
HS
Blue
Flashes - Shut down process
initiated by lightly pulling the CPU
ejector levers. This LED flashes in
synchronization with the CNTL
4000’s card’s HS LED.
ON - Card is in a power down
mode.
Card removal Initiated - The card
can be removed safely once the
CPU ejector levers are fully open.
Card Insertion Initiated - If during
the startup phase the blue HS LED
remains lit, please ensure that the
card is properly seated in the
chassis. If this problem persists,
contact your next level of support.
Table 1-10
RMX 4000 Front Panel LED’s (Continued)
Component
LED ID
LED Color
Description