Playback, Reading and displaying the time data, Displaying the time data on the monitor screen – Panasonic AJ-D92P User Manual

Page 37

Advertising
background image

37

Playback

5. Reading and displaying the time

data

The recorded time code and user’s bit are read by the
built-in time code reader during tape playback.
The time data which is read out can be displayed on
the status display window or monitor screen.

Displaying the time data on the status
display window

The time data to be displayed is selected by the TCG
selector switch and DISPLAY switch positions.
What time data is to be displayed is determined in two
stages: first by the position selected by the TCG
selector switch, and second by the position of the
DISPLAY switch.

Status display window

TCG selector switch

DISPLAY switch

Displaying the time data on the monitor
screen

When the time data is displayed in the status display
window, connect the monitor’s input connector to the
VIDEO OUT 2 connector, and set the SUPER
IMPOSE switch to ON.
The time data will now be displayed on the monitor
screen.

Outputting the playback time code from
the TC OUT connector

When the unit is in the playback mode, the playback
time code is output.

TCG selector

switch position

DISPLAY switch

position

Data displayed

SET

TC or CTL

Time code

F-RUN or R-RUN

UB

User’s bit

CTL

CTL

TC

Time code

UB

User’s bit

VIDEO OUT 2 connector

SUPER IMPOSE switch

TC OUT connector

Advertising