Panasonic AJ-D92P - Manual (Page 45)

45
<Notes>
If the PAGE button and DATA+ button or DATA– button are pressed when the CHARA H-POS or CHARA
V-POS item has been set, the counter display appears temporarily while these buttons are held down to
enable the setting to be checked.
Even while the PAGE button is pressed, the settings can be performed using the DATA+ button or DATA–
button while the actual status is checked.
000 KEY-INH SEL
0000
0001
0002 DIS
ST&EJ
ENA
For setting the switches which can still be operated on the front panel when
the KEY INHIBIT switch has been set to ON.
0: None of the switches can be operated.
1: Only the STOP and EJECT switches can be operated.
2: All the switches can be operated.
003 DISPLAY SEL
0000
0001
0002
0003 TIME
T&STA
T&R
T&S&R
For setting what is to be displayed by superimposing onto the video monitor
output.
0: Only the time is displayed.
1: The time and operation status are displayed.
2: The time and amount of remaining tape are displayed.
3: The time, operation status and amount of remaining tape are displayed.
004 CHARA H-POS 0000
0004
0008
0
4
8
For setting the character position in the horizontal direction for the
superimposed display.
005 CHARA V-POS 0013
0022
13
22
For setting the character position in the vertical direction for the
superimposed display.
006 CHARA TYPE
0000
0001 WHITE
W/OUT
For setting the type of superimposed display and menu display.
0: White characters are displayed on a black background.
1: White characters with black borders are displayed.
007 SYS FORMAT
0000
0001 50M
25M
008 PB FORMAT
0000
0001
MANUAL
AUTO
For setting the format during tape playback.
0: The format is based on the setting selected for menu item No. 007 (SYS
FORMAT).
1: The format recorded on the tape is used.
030 AUDIO P.SAVE
0000
0001
0002
ALLON
3/4ON
OFF
For setting the power save mode during recording.
0: The audio outputs of all four channels (CH1, CH2, CH3 and CH4) are
temporarily suspended.
1: The audio outputs of two channels (CH3 and CH4) are temporarily
suspended.
2: All the sound is output.
BASIC menu
Item Setting
No.
Superimposed
display
No.
Superimposed
display
Description of setting
The underlining indicates the factory setting.
Setup Menus
For setting the unit’s recording and playback format.
0: 50 Mbps mode
1: 25 Mbps mode
<Note>
When the 25 Mbps mode is set, the sound is recorded and played back on
two channels (CH1 and CH2).