Panasonic AJ-D92P - Manual (Page 58)

58
Warning Systems
The warning system’s priority sequence is as
follows.
1 SLACK
2 BATTERY END
3 TAPE END
4 HUMID
5 NO RF 6 SERVO
7 LOW RF
8 HIGH ERROR RATE
9 BATTERY NEAR END
10 TAPE NEAR END
Item
WARNING
lamp
Warning
alarm
Description of
warning
Operation of unit Remedial action
Warning
display
Warning
display
status
Battery
charge
display
Remaining
tape
display
Status display window (LCD)
No
display Flashes 4
times/second
for 3 seconds Sounds 4
times a second
° 1)
Memory status
error between
SYSCON and DV. Switch the power
OFF and consult
your local dealer. No
display
° 1) During recording
° 2) At any time except during recording
° 3) Once a second when SIMPLE has been selected as the setup menu item No. 906 setting.
° 4) The alarm can be switched to ON or OFF using the alarm setup menu items No. 900 to No. 903.
° 5) RF warning display will flash during REC and REC PAUSE modes. When the unit changes from REC and REC PAUSE modes, the RF
warning display will turn off.
Error code
[00:00:00:11] will
be displayed for 5
seconds in the time
code display
position in the
status display
window.
However, the main
unit will be put into
Enforced Recording
mode and
recording will
continue.