PowerTec OMRG25204 - Manual (Page 60)

Engine Operating Guidelines
RG,RG34710,5563 –19–07JAN02–1/1
Stopping the Engine
RG11299J
–UN–11SEP00
North American Standard Instrument Panel Shown
RG10616
–UN–16JUN00
Exhaust Stack Rain Cap
A—Throttle
B—Key Switch
1. Disengage clutch (if equipped) controlling engine
drivelines.
2. Move the throttle (A) to slow idle on standard
(mechanical) governor engines.
IMPORTANT: Before stopping an engine that has
been operating at working load, idle
engine at least 2 minutes at 1000–1200
rpm to cool hot engine parts.
For engines in generator set
applications, where the governor is
locked at a specified speed and no slow
idle function is available, run engine for
at least 2 minutes at fast idle and no
load.
3. Turn key switch (B) to "OFF" position to stop the
engine. Remove ignition key.
IMPORTANT: Make sure that exhaust stack cap (rain
cap) is installed when engine is not
running. This will prevent water and dirt
from entering engine.
15-16
110306
PN=60